Required toolkit
Video walkthroughs
Complete install checklist
Accept the freight delivery
Machine arrives via liftgate truck on a pallet in a crate. Inspect for damage before signing. Photograph any damage before you sign anything.
Uncrate the machine
Remove crate panels from the top down. The machine has caster wheels on the base. Do not lift it — roll it.
Roll to position
The facility contact will show you where the machine is going. Roll slowly. Take corners carefully.
Lock the caster wheels
Lock all four wheels once in final position. Show the facility contact where the locks are.
Tighten aisle screws
Open the front door with the key provided. Tighten all aisle screws with your Phillips head screwdriver before stocking.
Debug all coils
Spin every coil manually to confirm it rotates freely. If a coil does not spin, call us before proceeding.
Install the QR code
Apply the QR code sticker to the designated spot on the machine exterior as shown in the video.
Plug in power and wireless kit
Plug the power cord into the nearest outlet. Plug the ethernet cable into the wireless kit. No WiFi needed — it connects automatically over cellular.
Confirm boot up
The touchscreen should light up within 60 seconds. If it does not turn on within 2 minutes, call us before doing anything else.
Stock the machine
Load products matching the aisle labels. Use your 2 trash bags for all packing materials. Leave no packaging in the facility.
Run a live transaction
Purchase one item to confirm the card reader, coil, and dispensing all work. We will reimburse this charge.
Submit 3 completion photos
Upload all three to your Field Nation work order before checking out.
Interior — Stocked
Machine open, product loaded, all coils visible
Interior — Screen
Touchscreen powered on showing product menu
Exterior
Full machine in final position inside the facility
Need help during the install?
We are available the entire time you are on site. Call or text — we respond immediately.